Logo for Judge Tool and Gage

Meyer -MG-25 Plug Gage Sets - Class "X" - 25 pc.) - .0001" Increments - (Inch)

Starting at $186.11
  • Each set contains 25 pieces of Class X tolerance (.00004”) gage pins.
  • Traceable to NIST
  • Choice of two tolerances: Plus (+.00004”) or Minus (-.00004”)
  • Sets consist of a center nominal size, and 12 gages larger in .0001” steps and 12 gages smaller in .0001” steps. Metric sets available in 0.01mm increments.
  • Each gage is inspected and has a 2 microfinish or better.
  • Heat treated and through hardened to 60-62 Rockwell C
  • All pin gages over .060” or 1.51 mm are laser marked with size direction of tolerance and serial number for traceability.
Additional Information +
Enter NOMINAL (center) Pin Size (4 digit number with decimal):
Tolerance Direction :
Item No. Size Range Tolerance Direction Our Price QTY
MG1-25P .0122" - .0609" Plus $427.00
MG1-25M .0122" - .0609" Minus $427.00
MG2-25P .0610" - .2509" Plus $213.00
MG2-25M .0610" - .2509" Minus $213.00
MG3-25P .2510" - .5009" Plus $245.00
MG3-25M .2510" - .5009" Minus $245.00
MG4-25P .5010" - .7499" Plus $338.00
MG4-25M .5010" - .7499" Minus $338.00
MG5-25P .7500" - .8129" Plus $473.00
MG5-25M .7500" - .8129" Minus $473.00

Features:

  • Used as masters to calibrate measuring equipment and check linearity of comparators, micrometers, and calipers.
  • These ‘Tenth Step” gage sets have unlimited applications, such as quality control inspection, prototype work and production layout.
  • Inspectors select from the range of pins to find the size of a hole or slot.
  • These round masters simulate a cylindrical part which, unlike flat blocks, can detect uneven wear on the tips of micrometers and calipers.
  • The thin “line” of contact detects uneven face wear better than flat gage blocks with large contact area.