Logo for Judge Tool and Gage

Starrett - Dial Calipers - 6", 9", 12" Ranges - 120A Series

Starting at $154.00

Starrett - Dial Calipers - 6", 9", 12" Ranges - 120A Series

The Only American Made Dial Caliper
 
  • Sharp, clear dial graduations of .001" or 0.02mm – .100" or 2mm in one revolution
  • Sharp, black graduations on the satin finished bar, every .100" or 1mm
  • Choice of black, red or white inch dials; millimeter dials are yellow
  • Knife-edge contacts for both inside and outside measurements
  • Lock screw for dial bezel
  • Lock screw for holding the sliding jaw in position
  • 6" (150mm) and 9" (225mm) models have a covered rack depth rod. A detachable depth rod is available for the 12" (300mm) model
  • Hardened stainless steel bar, measuring surfaces, rack, gears and depth rod
  • Positive, split-gear anti-backlash control
  • Approximate Jaw Depths for 120 Series 6" and 9" Outside 1 1/2" (38mm) 12" Outside 2 1/2" (63mm) 6" and 9" Inside 5/8" (16mm) 12" Inside 3/4" (19mm)
Additional Information +
Item No. Range Dial Color Certificate MSRP Our Price QTY
120A-6 0 - 6" White No Certification $223.00 $200.00
120A-6 W/SLC 0 - 6" White With Certification $261.00 $235.00
B120A-6 0 - 6" Black No Certification $227.00 $204.00
B120A-6 W/SLC 0 - 6" Black With Certification $265.00 $239.00
R120A-6 0 - 6" Red No Certification $227.00 $204.00
R120A-6 W/SLC 0 - 6" Red With Certification $265.00 $239.00
120X-6 0 - 6" w/ Carbide Tip O,D, Jaw White No Certification $358.00 $322.00
120A-6 0 - 6" w/ Carbide Tip O,D, Jaw White With Certification $223.00 $200.00
B120A-6 0 - 6" w/ Carbide Tip O,D, Jaw Black No Certification $227.00 $204.00
R120A-6 0 - 6" w/ Carbide Tip O,D, Jaw Red No Certification $227.00 $204.00
120A-9 0 - 9" White No Certification $365.00 $329.00
120-12 0 - 12" White No Certification $416.00 $374.00
120Z-12 W/SLC 0 - 12" White With Certification $490.00 $441.00

Technical Specs: