- This lightweight gage is used for in-process or bench inspection of oil grooves, snap ring retainer grooves, “O” ring seat retainer grooves and similar internal recesses.
- It is also useful for checking bore dimensions and testing for taper, bell-mouth and out-of-roundness.
- Range: .375 - 6"
- Dial Indicator Graduation: .0005"
- Dial Indicator: Model No.: 81-136-1175
- Dial Indicator: Reading: ±30
- Dial Indicator: Range: .060"
Starrett - 1175 Series Groove Gage - .375 - 6" or 9.5-150mm Range
Features:
- The contacts are hardened steel with a hard chrome finish for long life
- Gage can be set with gage blocks or other methods such as micrometers, vernier calipers and ring gages.
- The reference jaw can be mounted in two positions on the range adjusting bar
- The bar itself is also adjustable for greater or lesser range
- A fine adjustment screw and a lock are also provided
- Supplied with two sets of jaws, both readily interchangeable
- Three sets of contacts are furnished (Styles 1-10, 2-10, 2-20) that can be attached to the ends of the jaws without replacing the entire jaw.
- Contacts have flush ends so that grooves at the bottom of blind holes can be gaged
- The contacts are hardened steel with a hard chrome finish for long life
- Gage can be set with gage blocks or other methods such as micrometers, vernier calipers and ring gages
- Furnished with storage case
- Range (in): .375 - 6"
- Graduations (in): .0005"
- Dial Reading: +30 / -30 .060" Range
Technical Specs:
