Logo for Judge Tool and Gage
DELTRONIC - Thread Wires - (Metric)

DELTRONIC - Thread Wires - (Metric)

Starting at $80.00

Deltronic Thread Wires are certified to meet or exceed requirements of the ANSI/ASME B89.1.17, B1.2, B1.16, B1.5, B1.8 thread standard as well as Federal Spec. GGG-W-366b and meet anticipated ISO Standard as well. 

PLEASE NOTE: Deltronic is no longer shipping Backorders at No Cost

Additional Information +
Click here for INCH sizes
Pitch (mm):
Item No. Pitch (mm) Our Price QTY
D-TWM.20 .20mm $128.00
D-TWM.225 .225mm $128.00
D-TWM.25 .25mm $128.00
D-TWM.30 .30mm $128.00
D-TWM.35 .35mm $128.00
D-TWM.40 .40mm $128.00
D-TWM.45 .45mm $128.00
D-TWM.50 .50mm $128.00
D-TWM.55 .55mm $128.00
D-TWM.60 .60mm $128.00
D-TWM.70 .70mm $128.00
D-TWM.75 .75mm $112.00
D-TWM.80 .80mm $112.00
D-TWM.85 .85mm $112.00
D-TWM.90 .90mm $112.00
D-TWM1.0 1.00mm $80.00
D-TWM1.25 1.25mm $80.00
D-TWM1.50 1.50mm $80.00
D-TWM1.75 1.75mm $80.00
D-TWM2.00 2.00mm $80.00
D-TWM2.50 2.50mm $80.00
D-TWM3.00 3.00mm $80.00
D-TWM4.0 4.00mm $80.00
D-TWM4.5 4.50mm $90.00
D-TWM5.00 5.00mm $128.00
D-TWM5.50 5.50mm $128.00
D-TWM6.00 6.00mm $128.00
D-TWM7.00 7.00mm $128.00
D-TWM8.00 8.00mm $128.00
D-TWM9.00 9.00mm $128.00
D-TWM10.0 10.00mm $128.00
D-TWM28PCL 28 pc. (.35mm -10.0mm) (TW28M-L Library) $3,047.00


  • Commonality - three wires within each set are within .00031mm of calibrated size
  • Set Diameter is within .0005mm of “best” wire size and calibrated to the nearest, .00025mm of the exact size:
  • Roundness is with- in .00025mm; 
  • Surface Finish is better than 2 micro-inches AA, lapped; 
  • Hardness - Rc 62-64 stabilized; 
  • Straightness of the central 12.7mm inch of the wire’s length is within  .00025mm maximum deviation. 

Technical Specs: