.00005"/.001mm Resolution
CDI Chicago - Electronic Depth Gages
Filter Products:
Base:
Technical Specs:
|
Model No. |
Base |
Range |
Resolution |
|---|---|---|---|
DGM2665 |
1" Round | .400" / 10mm | .00005" / .001mm |
DG10-1 |
2-1/2" x 1/2" Rectangie | .1" / 25mm | ..00005" / .001mm |
DG10-2 |
2-1/2" Wide Knife Edge | .125" | .00005" / .001mm |
DG10-3 |
2-1/2" x 1/2" Rectangie | .1" / 25mm | 00005" / .001mm |
DGM2665 - This gage is designed for measuring the depth of slots, holes, recesses, etc. from 0" to .4" deep. The flat base is positioned on the work surface, allowing the spindle to enter the hole or recess to its full depth. Measurements are automatically registered directly to the LCD display. The 1" diameter round base is hardened and ground, and is securely fastened to the indicator stem. The radius contact point is 3/16" diameter. All the features of the Logic Mini IQ are included in this versatile tool.
DG10-1 - This gage is designed for measuring the depth of slots, holes, recesses, etc. from 0" to 1" deep. The flat base is positioned on the work surface, allowing the spindle to enter the hole or recess to its full depth. Measurements are automatically registered directly to the LCD display. Zeroing is set with a fully-retracted contact point set flush with the bottom of the base. The 2 ½" wide x ½" thick base is hardened and ground, and is securely fastened to the indicator stem. All the features of the Logic IQ Series are included in this versatile tool.
DG10-2 - Depths of slots, grooves, recesses, etc. can be quickly measured. With all the features of the Logic IQ Series, knife edge base, and needle point contact, depths of up to .125" can be accurately measured. The cut-out base center allows an unobstructed view of the point. Zero is set with the fully-retracted contact point positioned flush with the base edge.
DG10-3 - Ideal for rapidly checking depth of holes, recesses, slots, etc., and for providing immediate readings. Fast and accurate measurements are obtained by zeroing the gage, which is achieved by setting the contact point flush with the base and pushing the "Clear" button. Simply push down the spindle until the contact point touches the work and reads the depth on the LCD display. The 2 ½" wide x ½" thick depth gage base is hardened and ground and is securely mounted to the indicator stem. All the features of the Logic IQ Series are included.
