Logo for Judge Tool and Gage

Starrett - Height Transfer Gages - 14", 24" & 48" Models - 252 Series

Starting at $1,063.00

The Starrett No. 252 Height Transfer Gage is ideal for use with test indicators or electronic amplifiers to accurately transfer height settings from gage blocks, height gages and other standards.

  • Extreme rigidity provides the vibration proof stability necessary to permit precise, repeat readings with indicators of the highest amplification
  • Extremely rigid, rectangular box-type hollow column mounted integrally on a heavy base
  • Adjusting mechanism is located in the base so the column and indicator are isolated and not affected by external factors, i.e. heat or hand pressure
  • Sizes available 14", 24" & 48"  
Item Range Our Price QTY
252Z-14 0-14in. $1,252.00
252Z-24 0-24 in. $2,070.00
252Z-48 0-48 in. $3,463.00

Features:

  •  Extreme rigidity provides the vibration proof stability necessary to permit precise, repeat readings with indicators of the highest amplification
  •  Extremely rigid, rectangular box-type hollow column mounted integrally on a heavy base
  •  Adjusting mechanism is located in the base so the column and indicator are isolated and not affected by external factors, i.e. heat or hand pressure
  •  Hand-fitting base design for sure-grip handling and easy movement
  •  Bottom of the base has three ground and lapped pads for stability and smooth movement on the surface plate
  •  Adjustable slide, incorporating a snug for holding test indicators or electronic gage heads, has rapid vertical manual adjustment
  •  Thumb screw allows slide to be locked
  •  Knob on base allows fine vertical adjustment of the slide unit relative to the fixed column
  •  A snug on the slide provides two holes (.375" [9.5mm] and .156" [4mm]) for holding gage rods or scribers
  •  The rod has a major diameter of .375" (9.5mm) and stepped diameters of 1/4" (3.2mm) and 7/32" (5.5mm) at one end and 5/16" (8mm) at the opposite end.
  •  Starrett 25, 81, 655 and 656 Series Dial Indicators also can be used on the height gage by means of a PT06784-A Gage Rod

Technical Specs:

  • Size LxWxT (in): 9 X 12 X 3
  •  Grade (U.S.): A Inspection
  •  Size LxWxT (mm): 225 X 300 X 75
  • Type: Height Transfer Gage
  •  : Base Size (Approximate) 5-3/4" L x 3-1/2" W (145mm x 90mm)
  •  Range (in): 0-14"
  •  Range (mm): 0-350mm